We are an official sponsor of the Vex Robotics Program. Vist our site at VexLABS for your Vex Robotics Parts & Accessories.        Our Pneumatics Kits for the Mini Robots are Now Available.        Have question? Visit the Technical Support Forum. Get your questions answered fast.
Our offices will be closed from December 22, 2007 to January 2, 2008.
Orders placed after 3PM Central on December 21, 2007 will not ship until January 2, 2008.

High Voltage Speed Controller

View Shopping Cart

New High Voltage Speed Controller.  Sixteen MOSFET H-Bridge technology  allows the Victor HV to handle 120A continuous (36HV Model) and 90A continuous (48HV Model).  The high voltage Victor provides output control from 3% to 100%.  The high current capacity, low voltage drop, and peak surge capacity make the Victor HV ideal for drive motors, while its braking options and precise control meet the demanding needs of arms and lift systems.  The speed controller can be directly driven from any IFI RC unit; the Mini RC, the Isaac16 Robot Controller, or the FRC Robot Controller.   We recommend using a PWM Signal Driver if you are not using an IFI RC unit.

  • 120A/90A Continuous
  • Only weighs 4 oz.
  • Ideal for High Current Drive Motors
  • Safely handles high continuous current draws and extreme current surges.
  • Integral cooling fan ensures cool FET junction temperatures.
  • The low voltage drop ensures the motor receives maximum power.
P/N Victor-HV-36-24

$199.95
Users Guide
Installation Info
Victor 36HV Data Sheet
Victor 48HV Data Sheet
Notes
Frequently Asked Questions (FAQ)

Online Ordering - Same Day Shipping by 3:00pm CST (Mon-Fri)
Part Number Description FIRST Legal In Stock Price   Online Purchase

VICTOR-HV-XX-24		 High Voltage Speed Controller.   Includes 24V Rotron Fan.

Select PWM Cable 
Select Voltage 48V is Out Of Stock - Available late Dec.		 $199.95 IFI Robotics


FAN-VICTOR

 Additional Fan for Victor Speed Controller
Works with Victor, Thor, Speed/Spin Control, Durable Rotron Brand. 		In Stock - Available for Immediate Shipment $8.95 IFIrobotics


CABLE-PWM-4PK

 PWM Extension Cable (4 PACK)
Large gauge wires. For Speed Controllers, Spikes, RCs and SSRs.
 In Stock - Available for Immediate Shipment $19.95 IFIrobotics

PWM-DRIVER		 PWM Signal Driver
Ensure the signal from your receiver/Robot Controller is Speed Controller compatible. Not Needed with IFI Robot Controllers.		 In Stock - Available for Immediate Shipment $14.95
IFI Robotics

Specifications
Control Signal Standard R/C Type PWM (Pulse Width Modulation)
Operating Voltage 12V to 42V (36HV) / 12 to 60V (48HV) (does not include the fan)
Fan Type Rotron.  Battle proven by Inertial Labs (and many others).
12V Fan Voltage 6V to 16V
24V Fan Voltage 16V to 30V
Maximum Current 120A continuous (36HV) / 90A continuous (48HV)
Surge Current 275A for < 1 second, 250A for < 2 seconds (36HV)
225A for < 1 second, 200A for < 2 seconds (48HV)
Power Connector 6-32 Screw Terminals
Signal Connector Use a standard non-shrouded PWM cable (3 wires)
Typical Application Power one motor with variable speed forward, reverse, or off
Weight 0.25 lbs

Notes

General Notes:

  1. The red wire (center pin) on the PWM cable connected to the Victor is an open circuit. There is no reason to disconnect this wire in the cable. The Victor does not source or draw power on this line.
  2. Do not reverse the input polarity on a Victor. Doing this will permanently damage the unit and void the warranty.

Signal Driver Notes:

  1. Use a PWM Signal Driver to ensure the signal from your receiver is Victor compatible.
  2. A PWM Signal Driver is not be needed with IFI Control Systems, some receivers, and some mixers.

Fan Notes:

  1. The Victor comes with a 24 V cooling fan attached to the top of the unit.
  2. The High Voltage Victor operates over a 12V-42V (36HV) or 12V-60V (48HV) range, however, the fan's voltage range is smaller.
  3. You can purchase an optional 12 V fan, and then replace the 24 fan supplied with the Victor.
 

IFIRobotics      1519 Interstate 30 West     Greenville, TX 75402      Info@IFIRobotics.com      903.453.0802

  

"Innovation First" and "IFIRobotics.com" are marks of Innovation First, Inc. All other product names/marks of others are the property of their respective owners.
Copyright © 2002-2008, Innovation First, Inc. All Rights Reserved.  Site Map